Call Now(980) 404-2911 Book Appointment Online
Commercial Refrigeration · Matthews & Charlotte, NC

Walk-In Freezer Installation in Matthews & Charlotte, NC

Need a new walk-in freezer? Roxly sizes, installs, and starts up commercial walk-in freezers — insulated panels and floor, defrost and heater systems, refrigeration, and controls — for restaurants, grocers, and food producers.

$50 Off Laboron a completed qualifying repair · new customers: first visit $135
  • Site visit and load calculation
  • Clear written estimate before work begins
  • Startup and temperature verification
  • 30-day labor / 90-day parts warranty on Roxly work
5.0 · 26 Google reviews

Hours of operation: We are open Monday through Saturday from 8:00 AM to 6:00 PM and on Sunday from 10:00 AM to 3:00 PM, Eastern Time. Emergency visits are available on request — just call us.

Request an Installation Quote Mention this form to save $50 Off Labor · 30-day labor / 90-day parts warranty
Thanks — your request has been received. The first available operator will contact you shortly to confirm your appointment.
Enter your name.
Enter a phone number.
Enter a valid email.
Enter your service address.
Select an equipment or system type.

No obligation. The first available operator will call you to confirm your appointment.

$50 Off Labor

On a completed qualifying repair — plus a $135 first visit for new customers

New-customer first visit $135; standard service call $185. Repair labor, parts, and materials are quoted after diagnosis — you approve the price before work begins.

Offer terms

Limit one coupon per household or business. Valid only toward a completed, qualifying repair — not valid toward the service call or diagnostic fee unless otherwise confirmed at time of booking. The new-customer rate applies to the first qualifying service visit and cannot be combined with other promotions unless approved in writing. Additional restrictions may apply. Mention this offer when scheduling.

Claim This Offer
Commercial Refrigeration

Walk-In Freezer Installation in the Charlotte metro

A walk-in freezer has to hold around 0°F reliably, which means the details matter more than they do for a cooler: insulated floor construction, heated door frames and drain lines, a properly specified defrost system, and a condensing unit sized for low-temperature duty.

Roxly installs walk-in freezers and handles the full scope — site measurement, load calculation, panels and floor, door and heater options, evaporator and condensing unit, electrical hookup, controls, and startup. You get a clear written estimate before work begins.

Why call Roxly

  • Site visit and load calculation
  • Written estimate before any work
  • Startup and temperature verification
  • Coordination of permits and inspections where required

Brands we work on

What to plan for

Walk-In Freezer Installation: what matters

Low-Temperature Capacity

Freezer duty needs a system sized for the lower evaporator temperature and for pull-down after product is added.

Floor Construction

Freezer boxes need an insulated floor or a design that prevents frost heave under the slab.

Defrost System

Electric or hot-gas defrost, termination controls, and drain heaters must be specified correctly.

Door Heaters and Frame Heaters

Heated door frames and gaskets prevent freezing shut and ice buildup.

Indoor vs. Outdoor Placement

Placement affects condensing unit selection, weather rating, and ventilation.

Electrical Load

Defrost heaters and compressors add significant electrical load — circuits and disconnects must be sized accordingly.

Refrigerant Selection

Low-temperature systems are moving to lower-GWP refrigerants — we spec what's right for your system.

Permits and Scheduling

Requirements vary by jurisdiction; we walk through what your location needs.

Process

How installation works

  1. Site visit and measurements

    We evaluate the location, power, drainage, and what you'll store.

  2. Load calculation and equipment selection

    We size the freezer system for your product load, door traffic, and ambient conditions.

  3. Written estimate

    You get a clear estimate covering the box, floor, door, heaters, refrigeration system, electrical connection, and startup.

  4. Installation

    Panels, floor, door, evaporator, condensing unit, lines, heaters, and controls are installed.

  5. Startup and verification

    We leak-check, evacuate, charge, program the controller and defrost, and confirm the box reaches temperature.

Brands

Walk-In Freezer Installation brands we service

Brand names describe repair experience, not manufacturer authorization.

Kolpak logo Master-Bilt logo Nor-Lake logo Bally Refrigerated Boxes logo Copeland logo Heatcraft logo
Our work

Recent work like this

Technician with refrigerant gauges, hoses and tools staged on top of a rooftop condensing unit
Gauges, hoses and tools staged on a rooftop refrigeration unit, with the building's other roof units behind.
Technician connecting a gauge manifold and hoses to a rooftop refrigeration condensing unit
Connecting gauges to read system pressures. We measure before we replace anything.
Multi-compressor refrigeration rack with a labeled control panel listing circuits for coolers and display cases
A multi-compressor rack with a labeled panel for each circuit. Larger systems like this are traced circuit by circuit.

See more of our work →

5.0 26 Google reviews

What customers say on Google

See all reviews on Google
A
Adelina Sandoval1 review
October 2026Commercial customer
Great service. [They] quickly diagnosed and repaired my commercial ice machine.
Commercial ice machineGreat price
M
Munis1 review
October 2026
My AC broke down, and Roman fixed the problem very quickly. He also offered the best price out of all the quotes I received. Great service at a great price! Highly recommend!
AC repairGreat priceRepair within 1–2 hr
R
Renato De Felippe4 reviews
October 2026
I have worked with Roman and his company to address my HVAC needs for a while and I highly recommend their service. They are professional, responsive, fair, and very knowledgeable. Thanks!
HVAC service
FAQ

Walk-In Freezer Installation — frequently asked questions

What goes into a walk-in freezer installation?

Insulated panels and floor, a freezer-rated door with heaters, an evaporator with defrost, a low-temperature condensing unit, electrical connections, controls, and drainage.

Why does a walk-in freezer need heaters?

Heaters in the door frame, gasket area, and drain line prevent ice from forming and sealing the door or blocking the drain.

How long does installation take?

It depends on box size, site conditions, and equipment lead times; we provide a realistic schedule in the written estimate.

Can you convert a walk-in cooler to a freezer?

Sometimes — it depends on the panels, floor, door, and refrigeration system. We evaluate whether conversion makes sense or if replacement is a better value.

Do you handle electrical connections?

We coordinate the electrical connection to the equipment; we'll tell you what your site needs in the estimate.

What warranty applies?

Eligible Roxly work carries a 30-day labor / 90-day parts warranty; manufacturer equipment warranties apply separately.

What are Roxly's business hours?

Roxly Appliance & HVAC Repair is open Monday through Saturday from 8:00 AM to 6:00 PM and on Sunday from 10:00 AM to 3:00 PM, Eastern Time. Emergency visits are available on request — call (980) 404-2911 and tell us what is down. You can also submit the online request form at any time and the first available operator will contact you to confirm your appointment.

Equipment down? Talk to us now.

Call or request service — the first available operator will confirm your appointment.

We are open Monday through Saturday from 8:00 AM to 6:00 PM and on Sunday from 10:00 AM to 3:00 PM, Eastern Time. Emergency visits are available on request — just call us.

Call Now(980) 404-2911 Book Appointment