Furnace Blowing Cold Air
A furnace that blows cold air is either not producing heat, because ignition, gas or a safety has shut the burners off while the blower runs, or the thermostat fan is set to On. Dual-fuel and heat-pump systems can also blow lukewarm air during defrost.
- Diagnosis by testing — not guessing
- Findings and a firm price before work begins
- Fast scheduling — call for the earliest slot
- 30-day labor / 90-day parts warranty
Hours of operation: We are open Monday through Saturday from 8:00 AM to 6:00 PM and on Sunday from 10:00 AM to 3:00 PM, Eastern Time. Emergency visits are available on request — just call us.
On a completed qualifying repair — plus a $135 first visit for new customers
New-customer first visit $135; standard service call $185. Repair labor, parts, and materials are quoted after diagnosis — you approve the price before work begins.
Offer terms
Limit one coupon per household or business. Valid only toward a completed, qualifying repair — not valid toward the service call or diagnostic fee unless otherwise confirmed at time of booking. The new-customer rate applies to the first qualifying service visit and cannot be combined with other promotions unless approved in writing. Additional restrictions may apply. Mention this offer when scheduling.
What you can safely check first
- Check that the thermostat is set to Heat and the fan setting is Auto, not On.
- Check that the gas supply valve is open and that the pilot or igniter is working if it is visible.
- Replace a dirty filter, since overheating can shut off the burners.
- Feel the air at the vent after a few minutes; short bursts of warm air followed by cold suggest a limit or flame fault.
When it's urgent: On a cold night this is a priority. Any gas smell is an emergency: leave the building and call your gas utility or 911.
What a Roxly technician does
- Observe a full heating cycle and watch for lockouts and codes.
- Test the igniter, flame sensor, limit switches and gas valve.
- Check airflow and the heat exchanger area for restrictions.
- Give you findings and a firm estimate.
What usually causes this
Ignition or Flame Failure
The burners do not light or shut off, so only the blower runs.
Thermostat Set to Fan On
The blower runs continuously and blows room-temperature air between heating cycles.
Overheating Shutdown
A dirty filter or blocked airflow trips the limit switch and the burners go out.
Gas Supply Problem
A closed valve or an interrupted supply starves the burners.
Heat Pump in Defrost or Backup Failure
On heat-pump systems, cool air can mean defrost, a charge problem or failed backup heat.
Why diagnosis matters: A symptom like this can trace back to several different root causes, and the fix — and its cost — depends entirely on which one it is. Roxly doesn't quote a repair price over the phone based on a symptom alone: a technician inspects the equipment on site, tests the likely components, and confirms the actual cause before giving you a firm estimate. That's what makes the quote accurate instead of a guess you find out is wrong after the work starts.
Furnace Repair — Matthews, Charlotte & the metro
Furnace Repair near you
Great service. [They] quickly diagnosed and repaired my commercial ice machine.
My AC broke down, and Roman fixed the problem very quickly. He also offered the best price out of all the quotes I received. Great service at a great price! Highly recommend!
I have worked with Roman and his company to address my HVAC needs for a while and I highly recommend their service. They are professional, responsive, fair, and very knowledgeable. Thanks!
Furnace Blowing Cold Air — FAQ
Should I address “furnace blowing cold air” right away?
A symptom like this can trace back to several different root causes, and the fix — and its cost — depends entirely on which one it is. Roxly doesn't quote a repair price over the phone based on a symptom alone: a technician inspects the equipment on site, tests the likely components, and confirms the actual cause before giving you a firm estimate. That's what makes the quote accurate instead of a guess you find out is wrong after the work starts.
Why is my furnace blowing cold air?
The burners are probably not staying lit, or the thermostat fan is set to On. We find out which.
Could my filter cause this?
Yes. A badly clogged filter can overheat the furnace and trip the limit switch, which shuts off the burners.
Is it normal for a heat pump to blow cool air?
Briefly, during defrost. If it stays cool, something is wrong.
Should I use space heaters?
Use them cautiously, and never leave them unattended or run fuel-burning heaters indoors.
What are Roxly's business hours?
Roxly Appliance & HVAC Repair is open Monday through Saturday from 8:00 AM to 6:00 PM and on Sunday from 10:00 AM to 3:00 PM, Eastern Time. Emergency visits are available on request — call (980) 404-2911 and tell us what is down. You can also submit the online request form at any time and the first available operator will contact you to confirm your appointment.
Don't wait on this one — call now.
Call or request service — the first available operator will confirm your appointment.
We are open Monday through Saturday from 8:00 AM to 6:00 PM and on Sunday from 10:00 AM to 3:00 PM, Eastern Time. Emergency visits are available on request — just call us.